Points To Consider When Considering Metal Roof Repairs

A metal roof can provide decades of protection from the elements without the need for major repairs. However, you must indulge in regular inspections as well as learn to identify problems before they transform from minor into major metal roof repairs along with huge repair bills.

Points to consider during Roof Inspection

In case you are skilled and agile enough to inspect the roof of your home or commercial structure, you need to keep a few points in mind to catch any problem in the bud. A visual inspection from outside will reveal loose or missing fasteners due to repeated expansion and contraction.

You should also inspect gutters and flashings, especially at the joints and look for gaps that may lead to seepage of moisture or water. You should also inspect the roof from inside to look for tell-tale stains on walls that can indicate water seepage. You must remember that water may have entered your roof from another section and stained the wall at another location after flowing through different underlying layers or through insulation. Hence, a thorough inspection is necessary to locate the actual point of entry.

Points to consider while repairing your Roof made out of Metal

Before you put any repair plan into action, it would be wise to confirm if your roof made of metal is under warranty. In addition, you may also wish to look at your home insurance policy to check if roof repairs can be claimed from the insurance company.

If you possess the required repair skills then you can try metal roofing repairs on your own. Once you have identified the section that needs to be repaired then you will need to purchase the required materials, be it waterproofing compounds, new fasteners, new sheet metal panels or shingles to replace damaged ones, or other supplies to complete the job.

In case you do not have the required skills then hiring a skilled metal roofing contractor will save a lot of time, energy, and money in the long run. A roofing contractor that has worked with some of the top builders and architects across Canada will be able to instantly comprehend the issues facing your roof upon detailed inspection as well as provide cost-effective solutions.

The chosen contractor will be able to repair and replace all affected sections of your metal roof, and may also provide warranty on repairs along with regular inspections. You will be able to rest easy knowing that the roof of your home is in capable hands for many years to come. In addition, regular inspection and repairs will certainly extent the life of your roof while reducing repair bills in the future.

Roofs made of metal can take a lot of abuse before they need repairs. However, you must engage in regular inspection and maintenance to nip any potential issue in the bud, and must opt for metal roof repairs done by a professional contractor in case you want the repair work to last for many years without any problems.

Read More

Importance of Flashing and Advantages of merging Aluminum Flashings with Metal Cladding

The roof of your dreams may just as well turn into a wet nightmare in case you do not install matching flashings. Flashings help protect all ends and corners of your roof and walls while complementing the chosen look of your home or commercial structure too.

With metal cladding gaining popularity with each newly-installed roof, it makes sense to opt for this material in case you plan to build a new home or office or plan to re-install a new roof over an existing structure. Aluminum flashings are a perfect match for metal roofs and walls since they possess several technical advantages while being affordable at the same time.

Water and moisture have the ability to sneak past any roof, especially at the intersections of chimneys, valleys, skylights, hatchets, towers, or parapets. Whether your structure is residential or commercial, you simply cannot afford to allow water or moisture to penetrate into the structure, damage the exteriors and interiors, and lower its specified lifespan.

Advantages of Flashings made out of Aluminum

Aluminum that is coated with paint or is anodized offers a tough-yet-malleable and durable alternative to other materials such as copper, stainless steel, etc. Aluminum is also very economical to purchase and install, and is easily available.

Aluminum can be shaped and formed to perfection, and most installers can do the same at the site, hence saving valuable time and money while ensuring a leak-proof fit. Aluminum complements metal roofs and presents a seamless finish that enhances the look and value of any home or commercial structure.

In the odd case of damage, you can quickly patch any flashing made of aluminum to stop leakage instantly and can opt for professional repairs at your convenience.

Care to be taken while installing and maintaining Flashings made from Aluminum

You must make sure that there is no corrosive galvanic reaction between the flashings made from aluminum and the roof or walls of your home or commercial structure. You must use aluminum that is coated with anti-corrosive compounds so that there is no adverse reaction when this material comes in contact with metals, wood, cement, or copper.

Care should also be taken to use compatible fasteners that do not react with aluminum. Since aluminum cannot be welded, care must be taken to ensure perfect caulking, lapping, and sealing for that perfect joint.

You may have already made a wise decision to opt for metal cladding for the walls and roof of your home or commercial structure. However, you need to follow up this action by opting for aluminum flashings, which will provide a safe, water-proof, and long-lasting solution while enhancing the look of the structure at the same time.

Read More

Factors to Consider when Installing Metal Roofing on any Structure

If you are in the midst of getting a brand new residential or commercial structure designed and constructed then you need to consider a few important factors when it comes to metal roofing. Adhering to these factors will ensure long life of your metal roof cladding as well as noticeable savings in terms of time and money.

You may be aware of multiple advantages of using metal as your material of choice for your roof. However, there are other factors such as installation, quality of the metal and accessories used, energy efficiency values, etc., that also determine the long-term value of your investment. Mentioned below are a few factors to consider before installation of roof cladding made of metal.

Fire Ratings

While it is certainly important for your chosen metal roof to sport top fire ratings (A), you also need to consider associated materials that are involved in the construction of a metal roof. You need to ensure that you only use non-flammable insulation as well as consider the fact that wooden columns, beams, and trusses do not possess such high ratings.

One added advantage of using metal for roofing is that in case of fire, the sheet metal will not emit toxic gases that are released by several other roofing materials.

Handling High Winds

The roof on your residential or commercial structure should be installed by your roofing contractor in a manner that it handles wind uplift without any issues. Your contractor should consider wind speed, structure elevation, slope angle of the roof, wind exposure from surrounding structures, and complete structure geometry to ensure that the roof is not damaged during high winds.

Energy Values

The better the energy value of your roof, the greater the savings in your energy bills. However, proper installation by an experienced roofing contractor too plays a very important role since those high energy values can get reduced to naught in case your roof begins leaking or prevents escape of moisture. The right type of insulation along with perfect installation of insulation will ensure that your energy value on paper gets translated into actual savings over a long period of time.

Quick disposal of snow, ice, and water

Your contractor should consider several factors that ultimately result in quick disposal of snow, ice, and water from your metal roof. Factors such as angle of your roof or roof pitch, low friction-coefficient value, proper design to evacuate snow and ice in a safe manner or roof drift, etc., must be considered to prevent snow build-up that can increase roof load and chances of seepage as well as snow avalanches.

Adherence to all applicable Building Codes

Your contractor must also ensure that the finished metal roofing adheres to all Canadian building code requirements since you will be responsible for all legal issues once the roof is constructed on your home, office, factory, or agricultural structure. An experienced roofing contractor that has worked with top builders and architects will be able to ensure that you do not face any coding issues before, during, and after your project is complete.

A well-designed metal roof cladding installed by a competent contractor will provide decades of service without major maintenance. You must make sure that you consider all the above factors before you install a metal roof on any residential or commercial structure in Canada.

Read More

Protect your Home and reduce Pollution by installing Environmentally Friendly Wall Cladding

Wall cladding for your home, office, or manufacturing facility should ideally help protect the structure from the elements as well as enhance its looks while lasting for decades on end. However, it is also very important to opt for environmentally friendly wall cladding to reduce your carbon footprint that includes during manufacturing, installation, and even long after the life of the cladding is over.

Most claddings available in the market either require depletion of natural resources such as forests or need a lot of energy to produce and also require infusion of chemicals that are harmful to the environment. For instance, wood wall cladding and roofs require chopping down trees as well as application of chemicals using pressure treatments to prevent it from rotting quickly as well as keeping harmful bacteria at bay.

Similarly, other materials such as wood fiber may contain certain chemicals that are not environmentally friendly. Such products also have a low lifespan and end up in landfills once their expected lifespan is over.

However, one material that is quite easy to manufacture, extremely easy to maintain, lasts easily for over 40 years, and can be recycled even after its lifecycle is complete, is metal. Modern metal manufacturing methods ensure that there is minimum energy used in manufacture even as recycled metal is additionally used to create new metal wall cladding as well as roof cladding.

Metal possesses extremely high weight to strength ratio and can be installed on existing walls. Hence, you need not strip away your old wall and dump the material in a landfill. You can merely install your new metal wall over your old wooden, fiber, or stone one. Metal claddings, when insulated with appropriate insulation can also save around 20 percent in energy bills thanks to excellent thermal properties possessed by metal. You not only save money in heating and cooling bills, but also end up helping the environment by consuming less energy and thereby reducing your carbon footprint.

Metal also possesses high ratings for resistance to fires and hailstorms. In addition, painted metal containing polymers that prevent rusting and fading can ensure that your walls will look stunning even after years of service. This will result in fewer repainting jobs during its lifetime, which in turn adds to the environmentally-friendly nature of this strong and light material.

The key is making sure that your metal walls last really long is to hire an expert installation contractor having enough experience in working together with leading architects and builders in installing walls and roofs as well as in maintaining them. A contractor with an in-house metal panel manufacturing facility will ensure minimum wastage, highly-competitive rates, and easy availability of spare materials in case required in the long run.

There are indeed very few environmentally friendly products when it comes to wall claddings that can make your home or commercial structure look aesthetically pleasing and last for a very long time with negligible maintenance. One material that trumps all others in terms of strength, long-life, and environmental friendliness is metal. You must look to metal wall cladding if you wish to help the planet while protecting your residential or commercial structure from the unforgiving Canadian weather for several decades.

Read More

Install custom metal wall cladding for an eye-pleasing and sturdy structure

Homes and commercial structures in Canada need to brave the harsh elements while looking aesthetically pleasing at the same time. In addition, the material used for wall cladding must also be affordable and long-lasting. One green product that can withstand the test of time and nature at an affordable rate and also be reused once again is metal.

Metal wall cladding is used in a wide variety of applications ranging from single sheet metal walls for agricultural structures to complex and insulated applications for homes and other commercial structures. Metal possesses several benefits over various other materials such as wood, concrete, stone, vinyl, asphalt, etc.

In case you wish for your home or office to sport a distinct look as well as protect you from high winds, rain, snow, and hailstorms that form part and parcel of unpredictable Canadian weather then you can opt for custom metal work for your exterior walls. You need to choose a competent Canadian metal cladding contractor that possesses the required expertise as well as experience to handle your wall cladding project.

The contractor must have worked with top builders and architects on residential and commercial projects of varying sizes. Such a contractor will be able to provide a customized solution to your needs as well as ensure that your structure ends up with a unique look that draws gasps of admiration from each viewer.

For a commercial establishment, a well-designed and executed metal cladding project for walls can help enhance brand image while protecting the occupants inside the structure at the same time.

However, you can receive extremely competitive quotes from a contractor only if the company has a direct source to a sheet metal manufacturing company. Such a combination can provide customized metal sheets that are cut and installed with the highest possible level of precision.

An experienced metal cladding company with its very own manufacturing plant can ensure that the required custom metal work proceeds without a hitch right from design to fabrication to installation. In fact, you can save a lot of money before, during, and after installation. You will be able to save a ton in material cost and will also be able to enjoy the benefits of metal cladding on your walls such as long life, negligible maintenance, and lowered energy bills for several decades.

Metal cladding allows designers to turn their creative ideas into reality, albeit with the help of an experienced contractor. Metal is an extremely versatile material that has both strength and flexibility to convert seemingly impossible designs into reality.

The right combination of high quality metal cladding for the walls of your home or commercial structure along with a capable contractor that has the ability to source the metal right from the source can reward you in multiple ways. Your metal wall cladding project will proceed smoothly from start to finish even as you end up with a structure that wows viewers.

Read More